|
Product Details:
|
Color: | Silver | Certification: | ISO9001:2008 |
---|---|---|---|
Technology: | High Precision Welding | Materila: | 201 ,202 , 304 , 304L , 316 , ,316l |
Use: | Polyester Filter | Technical Parameters: | Filtration Accuracy Is 0.5-200um |
High Light: | SS304L BOPP Filter,Spin Pack BOPP Filter,SS304L stainless screen filter |
Spinning mesh filter , BOPP filter , extruder filters , spinning filter , spin pack and ring , extruder filter
The production of plastic requires a high degree innovation among producers and equipment suppliers. Hanke is able to combine core polymer filtration production needs with new and innovative ideas to optimize filtration solutions.We can supply the sets of spinning filters to help you produce good quality polymer and reduce your production cost.
Spinning filter element
This filter is a cylindrical filter equipped with pleats to improve the filter rate.it is made of find woven wire mesh which is usually used where the fluid enters and leaves a containers or component.Hole of the wire meshes varies with the particular filter element while the wire mesh filter element removes normally only the larger particles of contamination from the fluid.
We will customize filters according to customer needs in different sizes from standard size to special-ordered size.
Element specification
Filtration rate:1-200micron
Temperature:-50℃-800℃
Diameter:14-180mm,Length:35-1500mm
Spinning/extruder filter pack
Combining multi filters with different mesh sizes by edge/rim, we offer filters exhibiting higher strength and higher efficiency.
We possess a variety of the press dies including filter with a general circle shape as well as the press dies in a ring shape and track type of the press dies.
Filter pack specification
The filter packs are usually made of fine mesh for filtration and coarse mesh to support.
Shapes of Spin Pack Screens:
1.Round Shaped Packs: Diameter 25 to 600 mm(or as customized)
2.Toroidal Shaped: Inner diameter 18 mm to 250mm
Outer diameter 50mm to 350mm
3.Rectangular Shaped: width 30mm to 100mm,length 60mm to 400mm(or as customized)
4.Slitting Belt: the minimum width 30mm
5.Cylinder Shaped:inner diameter from 8mm to 600mm
6.Square Shaped,Oval Shaped,other type filter
Material | Stainless steel,low carbon steel,copper,alloy,etc |
Filter rate | 1-200micron |
Layer | 1-7 |
Rim/edge | SS,,Al,copper or without edge,with gap or not |
Bonding | Spot welded or with rim |
Filter media | Woven wire mesh or sintered mesh |
Nominal Filter Rating (μm) | Protective Layer Mesh | Filtration Layer Mesh | Dispersion | Reinforcing Layer Mesh | Reinforcing Layer Mesh | Thickness | Air Permeability | Bubble Pressure | Weight | Porosity |
Layer Mesh | (mm) | (L/min/cm2) | (mm H2O) | (kg/m2) | ||||||
1 | 200 | 400 x 3000 | 200 | 12 x 64 | 64 X 12 | 1.7 | 1.81 | 360 - 360 | 5 Layers | Approx |
2 | 100 | 325 x 2300 | 100 | 12 x 64 | 64 X 12 | 1.7 | 2.35 | 300-590 | -8.4 | 40% |
5 | 100 | 200 x 1400 | 100 | 12 x 64 | 64 X 12 | 1.7 | 2.42 | 260-550 | 6 Layers | |
10 | 100 | 165 x 1400 | 100 | 12 x 64 | 64 X 12 | 1.7 | 3 | 220-500 | -14.4 | |
15 | 100 | 165 x 1200 | 100 | 12 x 64 | 64 X 12 | 1.7 | 3.41 | 200-480 | ||
20 | 100 | 165 x 800 | 100 | 12 x 64 | 64 X 12 | 1.7 | 4.5 | 170-450 | ||
25 | 100 | 165 x 600 | 100 | 12 x 64 | 64 X 12 | 1.7 | 6.12 | 150-410 | ||
30 | 100 | 400 | 100 | 12 x 64 | 64 X 12 | 1.7 | 6.86 | 120-390 | ||
40 | 100 | 325 | 100 | 12 x 64 | 64 X 12 | 1.7 | 7.1 | 100-350 | ||
50 | 100 | 250 | 100 | 12 x 64 | 64 X 12 | 1.7 | 8.41 | 90-300 | ||
75 | 100 | 200 | 100 | 12 x 64 | 64 X 12 | 1.7 | 8.7 | 80-250 | ||
100 | 100 | 150 | 100 | 12 x 64 | 64 X 12 | 1.7 | 9.1 | 70-190 | ||
150 | 50+100+50+30+30+100+50 | 2 | 25 | 50-150 | ||||||
200 | 40+80+40+20+40+80+40 | 2 | 26 | 50-150 |
sintered mesh filter Application in stainless steel sintering screen metal filter micron filter screen
The stainless steel sintered mesh filter element produced by our company has high filtration efficiency and long service life. It is suitable for filtration of liquid, gas and even solid. It is widely used in petrochemical, polyester, pharmaceutical, food, beverage, water treatment and other industries.
Sintered filter characteristic:
1. Surface filtration
2. Corrosion resistance
3. High temperature resistance
4. Stable filtering accuracy
5. High strength and steel properties
6. The mesh is smooth
7. Easy to clean and reusable.
8. Easy to form, process and weld
It is an ideal filter material with high compressive strength and uniform filtration particle size. It is suitable for continuous automatic operation process. In this respect, other materials cannot be satisfied.
The rings are always made of aluminium or stainless steel
Features
Efficient filtration rate
Good corrosion,heat and pressure resistance
Long working life
Easy to install
Application
widely used in plastic industrial for PP, PS, PVC, PET and Chemical Fibers etc.
Our Service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply to you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me feedback. If you have any questions about the problem, contact us, we will offer the solve way for you.
5.Sample testing support.
6.Changing for new if dissatisfaction.
Contact Person: Sunny
Tel: +8613031827161