Product Details:
|
Product Name: | Stainless Steel Filter Bag Single Bag Filter | Key Words: | Single Bag Filter |
---|---|---|---|
Housing Material: | SS304, SS316 | Bag Material: | Stainless Steel, PE , PP , Nylon ,, PTFE |
Filter Rate: | 0.5~1000 μm | Filter Type: | Single Bag, Double Bags, Multi-Bags |
Support Filter Basket: | Stainless Steel Perforated Wire Mesh | Working Principle: | Physical Filtering |
MOQ: | 1 Set | Transportation: | By Air, Sea, Express |
High Light: | 1um stainless steel filter bag,1.6mpa stainless steel filter bag,1um single bag filter |
1μm Filter Rate 1.6Mpa Work Pressure Stainless Steel Filter Bag Single Bag Filter
Stainless Steel Filter Bag Single Bag Filter Description
Bag filter is a pressure filter with filter bag and reinforced metal basket as filter element, which is installed on the transmission pipeline to filter and remove impurities in the transmission medium in the pipeline and protect the equipment on the pipeline from wear and blockage.
We can produce single bag filters or multi bag filter systems to meet the needs of different applications.
Stainless Steel Filter Bag Single Bag Filter Application
Bag filter is widely used in automobile production, petroleum, chemical industry, electronics, food, metal processing, pharmacy, water treatment and other industries.
Particial Parameters
Mesh No. | Dia(mm) | Interceptable particle size(μm) |
Percentage of interceptable particle size screening area (%) |
10 | 0.500 | 2000 | 64.0 |
12 | 0.450 | 1600 | 60.9 |
16 | 0.355 | 1250 | 60.7 |
20 | 0.250 | 1000 | 64.0 |
22 | 0.250 | 900 | 61.2 |
24 | 0.250 | 800 | 58.0 |
26 | 0.250 | 710 | 54.7 |
30 | 0.200 | 630 | 57.6 |
32 | 0.200 | 560 | 54.3 |
Stainless Steel Filter Bag Single Bag Filter Working Principle
Bag filter is installed at the front end of each supporting valve in the transmission pipeline. When the medium in the pipeline flows in from the filter inlet and sprays to the top of the filter, then enters the filter bag at the top of the filter for filtration, and then flows out from the filter outlet to the transmission pipeline at the other end, while impurities remain in the filter bag to prevent blockage of the transmission pipeline, To protect equipment pipes and fittings on pipes (such as water pumps, valves, etc.) from wear and blockage.
During the filtration process, the upstream pressure gradually increases until the bag is completely blocked. The filter delivery must then be stopped (independent bag filter) or transferred to another filter body (duplex bag filter) through a valve. Just open the lid and replace the filter bag.
Stainless Steel Filter Bag Single Bag Filter Replacing filter bag Method
Close all valves at inlet and outlet.
Open the pressure relief valve and ensure that the housing is not pressurized.
Remove the clip (for clip on top housing) or loosen the bolt on the top of the housing (for bolt on top housing).
Remove the top of the housing.
Remove the T-bolts on the top inside the housing so that you can also remove the diffuser.
Remove the dirty bag filter.
Put the clean bag filter into the filter basket and ensure that the bag filter passes straight down through the filter basket.
Place the diffuser back on top of the new bag filter.
Screw the T-bolt back into the housing (it may slide into the groove inside the housing) and tighten it.
Put the top back on top of the housing.
Reconnect the clip (for the clip top housing) and tighten it; Or tighten the bolts (top housing for bolting)
Contact Person: Sunny
Tel: +8613031827161